The Pearl Water RO Filter Kit with 15 LPH Classic RO Membrane is a replacement set for domestic RO water purifiers that use a standard 12-inch membrane. It contains a 12-inch Classic RO membrane (95% salt rejection, inlet TDS up to 1000 ppm), a 12-inch membrane housing, Flow Restrictor 450, push-fit elbow connectors, Teflon tape and a user manual. It is made in India by Pearl Water Technologies Pvt. Ltd. and comes with a 1-year warranty and 10-day replacement.
Highlights
Classic membrane grade: 95% salt rejection and support for inlet TDS up to 1000 ppm, suited to municipal and moderate-TDS supply
15 LPH rated output: LPH means litres of purified water per hour under standard test conditions
Leak-proof housing: one-piece injection-moulded body with double O-ring, made without glue or solvent
Anti-bacterial membrane sheet for hygienic filtration
Easy self-install: 90° push-and-insert connectors, Teflon tape and a user manual in the box
Buyer protection: 1-year warranty, 10-day replacement, 3% off on 2 kits, 4% off on 3, 5% off on 4 or more
A fresh membrane section in one box. The membrane removes dissolved salts, so when output TDS creeps up or the tap slows down, the membrane is the first suspect. This kit replaces the membrane, its housing, the flow restrictor and the fittings together, so every seal in that section is new. Not sure yours is due? Read how long an RO membrane lasts and when to replace it.
Right for moderate-TDS water. The Classic grade supports inlet TDS up to 1000 ppm. If your water is higher, step up to the 20 LPH Ultra kit, which supports up to 2000 ppm. Check your reading with the ideal TDS level guide and see what an RO membrane is made of.
Rated output is a ceiling, not a promise. A 15 LPH rating is measured under standard test conditions. Real output depends on inlet pressure, water temperature and TDS; see why a new membrane can produce less water than its rating.
Fitting it yourself. Push-fit elbows, Teflon tape and a manual let most households swap the section without a plumber. Follow our step-by-step DIY installation guide and keep the unit healthy with these RO maintenance tips.
What is in the box
|
Component |
Specification |
Job in the purifier |
|
Classic RO membrane |
12 inch (30 cm), 15 LPH, 95% salt rejection, up to 1000 ppm inlet TDS |
Removes dissolved salts, heavy metals and other soluble contaminants |
|
Membrane housing |
12 inch, 31.5 × 7 cm, one-piece injection moulded, double O-ring |
Holds the membrane under pressure and directs purified and reject water |
|
Flow Restrictor 450 |
Small inline restrictor |
Creates back pressure and sets the recovery ratio |
|
Elbow connectors |
90° push-and-insert fittings |
Joins RO tubing without leaks |
|
Teflon tape |
PTFE thread-seal tape |
Seals threaded joints |
|
User manual |
Printed guide |
Walks through the swap |
Check before you buy
Your purifier takes a 12-inch membrane, and the housing space fits 31.5 × 7 cm (see the RO filter kit compatibility guide)
Your inlet TDS is within 1000 ppm
You are buying a genuine membrane: read how to spot a fake or duplicate RO membrane
You want the kit, not just a membrane: see RO filter kit vs individual filters
Complete your service (related block under the buy box)
Complete RO Filter Kit with Inline Filters & 15 LPH Membrane (Classic): adds the pre-filters
RO Filter Kit with RO Membrane 15 LPH & Inline Filters (Classic)
RO Filter Kit with RO Membrane, Alkaline & Inline Filters (Classic)
Browse all domestic RO membranes and RO filter kits
Not sure which kit fits? WhatsApp us on +91 85880 22991 or call toll-free +91 95822 15137.
This RO Filter Kit is one of the best RO Kit which contain 80 GDP RO Membrane, Housing and connectors.. It is the best qua;ity Leak Proof RO membrane housing with double O-ring alsosupport all water purifiers.
Required fields are marked *
What does the Pearl Water 15 LPH RO filter kit include? It includes a 15 LPH Classic RO membrane, a 12-inch membrane housing, Flow Restrictor 450, push-fit elbow connectors, Teflon tape and a user manual. It is a complete membrane-section replacement for a domestic RO purifier.
Will this kit fit my RO purifier? It fits purifiers that use a standard 12-inch (30 cm) membrane; the housing measures 31.5 × 7 cm. Pearl Water lists it as compatible with domestic RO systems. Measure your existing housing first and check the compatibility guide.
What is the difference between the 15 LPH Classic and 20 LPH Ultra kits? The Classic membrane has 95% salt rejection and supports inlet TDS up to 1000 ppm; the Ultra has 98% rejection and supports up to 2000 ppm. Pick Classic for lower-TDS municipal supply and Ultra for high-TDS water. See the 20 LPH Ultra kit and the types of RO membranes available.
What TDS should my purifier deliver after fitting this kit? Output TDS depends on your inlet water, but most households aim for a drinking range well below the inlet value. See what TDS should come out of your RO purifier. If TDS does not fall after a change, read TDS not reducing after changing the RO membrane.
Is the RO still not working properly after fitting new parts? Check connector seating, tubing direction and inlet pressure first. Our guide to RO still not working after service lists nine causes and fixes.
Can I install it without a technician? Yes. The connectors are push-and-insert, the Teflon tape seals the threads and a manual is included. Our DIY installation guide walks through it. If you would rather have it done, see RO service.
What warranty and return terms apply? The kit carries a 1-year warranty and a 10-day replacement window. Ordering 2, 3 or 4+ kits gives 3%, 4% or 5% off. Details are in the return policy and shipping policy.
SUNNY KHALIFA (17-May-2024)
IT'S A AMAZING PRODUCT
LANA RHODES (17-May-2024)
NICE PRODUCT
HIMANSHI KOSHYARI (17-May-2024)
IT'S A AMAZING PRODUCT
SMITA DEB (17-May-2024)
GOOD PRODUCT
KARTIK THAKUR (17-May-2024)
VERY GOOD AND AMAZING PRODUCT
ANIKEET (17-May-2024)
VERY GOOD PRODUCT