Have custom plant sizing requirements, hard water TDS queries, or need a technician site visit? Speak directly with our deployment engineers.
The Pearl Water 250 LPH fully automatic RO plant makes 250 litres of purified water an hour at a rated recovery of 70%. It is specified for inlet TDS up to 1,500 ppm and can run up to 10 hours non-stop, which is about 2,500 litres in a full run. At 70% recovery, about 357 litres of raw water an hour goes in and about 107 litres leave as reject. It comes with a pressure gauge, flow meters and a display panel for checking performance. It has a rust-free stainless steel body and a 1-year warranty. Confirm your water analysis with an engineer before ordering.
What it is
This is a fully automatic commercial RO plant for medium and large buildings and facilities. It is the lower-cost 250 LPH automatic option, for sites whose raw water is within 1,500 ppm.
How it works
Reverse osmosis pushes water through membranes under pressure. The membranes hold back most dissolved salts, which leave as reject, while the purified water, called permeate, goes to use or to storage. The pressure gauge, flow meters and display panel let you see how the plant is running. Ask our engineers for the stage list, which the product page does not give.
Key features
Why the problem matters
RO performance drifts as membranes foul, and the first signs show up in pressure and flow, not in taste. A plant with gauges and a display makes those changes visible early. A plant without them leaves you guessing until output drops.
Where it is used
The page lists food and beverage, textile, leather and garment units, educational institutions, and multinational corporations and commercial towers. Process-water quality needs vary by industry, so share your requirement for a fit check.
Choose the right product
Test your water (TDS and hardness) first, then compare TDS rating, automation and capacity.
Sibling prices above are listed excluding GST on the category page. See the full industrial RO range.
Fully automatic running, with gauges and a display to check performance at a glance.
Pressure and flow readings let you spot a change before output drops.
At 70% recovery, the plant takes less from your source for every litre of purified water.
Full automation keeps routine production independent of staffing.
If your water is within 1,500 ppm, you don't pay for a higher rating.
The stainless steel construction is made for continuous commercial duty.
A 1-year warranty and an ISO-certified maker, with our team reviewing your water analysis.
Everything you need to know about 250 LPH-Automatic RO-TDS upto 1500-Recovery 70 %
Our product experts are here to help.
"Prompt delivery and professional technician setup managed from the regional hub. Flawless performance."
Action completed successfully.
Action completed successfully.