| Material | Plastic |
| Brand | Pearl Water |
| Item Weight | 400 Grams |
₹ 179 ₹ 199
Required fields are marked *
A CTO carbon block filter is an activated carbon filtration cartridge designed to reduce chlorine, unpleasant taste, odor, and certain organic contaminants from water. CTO commonly refers to Chlorine, Taste, and Odor reduction.
A 10 inch carbon filter is a replaceable filtration cartridge designed to fit compatible 10-inch filter housings. It is commonly used in RO water purifiers, drinking-water filtration systems, under-sink filters, and other water-treatment applications.
A CTO filter can help reduce:
Chlorine
Unpleasant tastes
Odors
Certain organic compounds
Some chemical contaminants
The actual removal performance depends on the carbon media, cartridge design, water quality, contact time, and manufacturer's specifications.
A CTO filter is a type of carbon block filter designed primarily for chlorine, taste, and odor reduction. Carbon block cartridges can differ in carbon type, density, pore structure, dimensions, and contaminant-reduction capabilities.
A CTO carbon filter is commonly used as a pre-filtration stage in an RO purifier. It helps reduce chlorine and organic contaminants before water reaches the RO membrane.
This pre-treatment can be particularly important because certain RO membranes can be damaged by chlorine exposure.
Replacement frequency depends on:
Incoming water quality
Chlorine concentration
Daily water consumption
Water pressure
Filter capacity
RO purifier usage
Replace the cartridge according to the manufacturer's recommended service interval or when filtration performance and water flow decline.
A sediment filter primarily removes suspended particles such as dirt, sand, rust, and silt.
A CTO carbon block filter primarily targets chlorine, taste, odor, and certain organic compounds.
Many RO systems use both filters as separate stages because they perform different filtration functions.
A GAC (Granular Activated Carbon) filter contains loose granules of activated carbon, while a CTO carbon block filter uses compressed carbon material formed into a block.
Carbon block filters generally provide greater contact with the water and can offer more consistent filtration, depending on the cartridge design.
Yes. A compatible 10 inch carbon block filter can be used as a carbon filtration stage in many domestic RO systems.
Before purchasing, check the cartridge dimensions, housing compatibility, flow requirements, and carbon-filter specifications of your RO purifier.
No, a standard CTO carbon block filter is not designed primarily to reduce TDS.
Its main purpose is reducing chlorine, taste, odor, and certain organic compounds. An RO membrane is the component responsible for significant reduction of many dissolved substances and TDS.
Yes. One of the primary purposes of a carbon block filter is to reduce chlorine from water.
The actual chlorine-reduction capacity depends on the carbon type, cartridge quality, water flow, contact time, and chlorine concentration.
Yes. A properly selected CTO carbon filter can help reduce chlorine and certain compounds responsible for unpleasant tastes and odors, potentially improving the taste and smell of drinking water.
A 10 inch CTO cartridge requires a compatible 10-inch filter housing with the appropriate cartridge diameter and end configuration.
Before purchasing, check:
Cartridge length
Cartridge diameter
Housing type
Connection size
Flow rate
End-cap configuration
Consider:
Carbon type
Chlorine-reduction capacity
Required flow rate
Cartridge dimensions
Water quality
RO system compatibility
Filter service life
Manufacturer specifications
Do not select a carbon block cartridge based only on price.
A standard CTO carbon block filter should not be relied upon as the sole method for removing or disinfecting bacteria and viruses.
If microbiological safety is a concern, use an appropriate treatment technology such as UV disinfection or another validated purification method.
